Thermography and Thermal Imagers
Serve Sat SRL company Therm offers Thermography / thermal imagers in the installation and construction, such as:
- Detecting defects and ensure quality construction
- The exact location seepage from roof
- Energy consulting services
- Heat monitoring systems and installations
- Monitoring and checking solar energy systems
- Identifying burst pipes
- Examining moisture damage
- Preventing mold
- Testing the tightness of a building
What is thermography
All objects that have a temperature higher than 0 absolute (-273.15 ºC), emit infrared thermal radiation in infraroşu.Radiaţia is not visible to the human eye, but using thermographic camera, radiation can be observed.
Construction quality assurance and fault detection
Analysis via Testo thermal imagers is an effective and rapid method of detecting possible construction defects. In addition, Testo thermal imagers are ideal for proof of the quality and the correct implementation of construction or renovation measures. In a thermal image become visible loss of heat, moisture and leaks in a building. Defects execution of insulation and building damage are also detected - without contact!
The exact location seepage from roof
Wetlands in the roof keeps the heat from the sun longer than intact areas, especially in flat roofs. Thus, the evening cools the irregular roof. Testo thermal imagers using these temperature differences to pinpoint the areas with moisture and insulation defects on the roof.
Energy consulting services
In termografierea buildings, infrared technology is ideal for a rapid and effective loss of heat or air conditioning systems of buildings. The resolution high heat, Testo thermal imagers visualize in detail faulty insulation and thermal bridges. Ideal for recording and documenting the heat loss of exterior doors and walls, the frames and radiators, roof or structural ture of entire buildings. Testo thermal imagers are the ideal tools to obtain a complete diagnosis, for maintenance and energy advice.
Heat monitoring systems and installations
Due to light and intuitive operation chambers termovi- sion from Testo systems, heat / air conditioning can be tested quickly and reliably. A glance with the thermal imager is enough to discover irregular temperature distribution. Deposits and blockages in radiators are also detected accurately.
Monitoring and checking solar energy systems
There are two main reasons for examining solar energy systems: Safety and performance monitoring. Solar energy systems reach the best performance in full sun. Both photovoltaic systems both small and large can be monitored effectively without contact and from a distance using Testo thermal imagers. It reached the highest level since the economic viability faults are identified and guaranteed smooth operation of all components. Obtain additional safety due to the possibility of introducing an important parameter, intensity of solar radiation: the value entered is stored together with the thermal image and is available later for analysis.
Identifying burst pipes
If suspected crack pipe, most often the only solution is to break walls and floors. Using thermal imagers from Testo, your work minimizes damage and costs. Leaks in the heating pipes in the floor and other inac- cessible are localized precisely and without damage. It is thus avoided destroying walls and repair costs are much lower.
Examining moisture damage
Not all moisture from the pipe wall is caused by a ruptured. Damaged rainwater runoff can cause moisture. Also, clogged drains or seepage of water could cause damage. Testo thermal imagers identify the source of moisture and infiltration of rainwater before it spread and cause serious damage.
Preventing mold
Loss of energy causes thermal bridges. In addition, condensation may occur in the ambient air. As a result, mold develops in these places, the inhabitants and the risk of disease increases. Testo thermal imagers calculate the value of the surface relative humidity for each measuring point, by measuring the temperature am- bientale, umdităţii air and surface temperature. Mold risk areas are displayed on the screen before they become visible: the affected areas are shown in red, risk-free mold areas are highlighted in green. The danger of mold can be detected in time-even in hidden areas or corners.
Testing the tightness of a building
If doors or windows are not installed properly, winter, cold air can enter the building from the outside and warm air inside can be lost. The result: heat loss and high energy costs. The combination of thermography cameras and Blower door and has proved successful. In this procedure, a negative pressure is created in the building so cold outside air enters through cracks. Thermal imagers detect cracks considerably easier. Insulation defects are localized in a timely manner without the need of costly repairs.
Innovative technology - easy to use.
Testo thermal imagers offer optimum quality thermal imaging and intelligent system components. Thermographic applications in order to achieve the highest level of safety and efficiency, engineers have developed innovative technologies Testo thermal imagers optimally adapted. This means that each Testo thermal imager is an extremely powerful and easy to use.
Operating Mode solar
The intensity of solar radiation plays an important role in the monitoring of photovoltaic systems. If the amount is too small, thermographic measurement is not relevant. With the mode of operation of solar thermal cameras Testo moviziune amount of solar radiation can be introduced directly into the instrument. This value is not lost but is stored with each thermal image and is available for analysis software for PC.
Information from the manual thermography thermographic construction equipment representative, Testo, Romania.
